VOX™: Latin for voice. The voice of your gun- Raise your
standards and lower your voice…™
Energetic Armament is disrupting the status quo again. The
Vox™ silencer represents the next level of precision engineered rifle
silencers. The silencer core is CNC welded from C300 Maraging (MARtensitic
AGING) nickel-cobalt superalloy. Energetic Armament is the first silencer
manufacturer to apply this ultra-strong alloy to a silencer. This aerospace
alloy was developed and used by NASA to meet the extreme high-temp stress
requirements of rocket motor casings with an incredible strength to weight
ratio. Tensile yield strength is a measure of how much force a material can
withstand before it begins to fail. Other manufacturers are stuck with 17-4
H1150 Stainless which has a yield of 100ksi or 6Al-4V titanium which has a
yield of 120ksi. The C300 maraging steel used in the VOX™ is heat treated to
achieve a yield of over 270ksi. What’s more: It has more strength at 1,000°F
than either stainless (17-4 H1150) or titanium have at room temp! The unique
material science of the VOX means you don’t have to compromise- you get the
rugged full-auto rated capability of a heavy silencer with the light weight of
a less rugged titanium can. No other silencer offers this spectrum of
capabilities and features.
The data shown in the above graph is taken from Metallic
Materials Properties Development and Standardization (MMPDS) which is the US
Federal standard for metallic materials properties. This standard is used for
DoD (Formerly Mil-Handbook-5), FAA and NASA for flight critical design and
procurement. This represents statistically validated materials properties for
Aerospace Materials Standards (AMS). Data shown for C300 Maraging Steel is per
AMS 6514 (bar) and for 17-4PH Stainless is per AMS 5643 (bar).
The ultra strength of this unique aerospace alloy allows the
VOX™ to achieve very low weight at only 12.9 oz (S) / 9.9 oz. (K) and without sacrificing durability. The high
strength alloy allows thinner walls which not only optimize low weight but also
increases internal volume while maintaining a small outer envelope. More
internal volume = better sound attenuation.
The VOX™ is compatible with all industry standard
quick-disconnect mounting systems including the Q™ Plan-B™, Dead Air™ KEY-MO™
(DA428), Silencer Co.™ ASR™ and others. This allows the operator to use the
muzzle devices they already have and makes swapping your VOX™ between guns very
simple and convenient.
The end cap of the VOX™ is removable and features a wipe
holder as standard equipment. A high temperature rated silicone wipe provides
ultra-quiet sound performance when using sub-sonic rounds. The wipe forms a
seal to the exiting bullet to control gas flow and bring the ultimate quiet to
your shot. The wipe is easily removed for heavy supersonic, high power shooting
is needed. The VOX™ is quiet… really quiet… with low, even tone that gives your
rifle the voice you want.
Energetic Armament stands by our silencers with a lifetime,
no bullshit, guarantee. If you need us, we will be there to take care of your
silencer. Our patent pending banded core construction allows us to repair
damaged silencers quickly and get you back on the firing line.
Key VOX S™ Silencer specifications:
Assembled Weight:
12.9oz (357 g)
– Vox S™ Direct Thread w/ wipe
9.9oz (281 g)
– Vox K™ Direct Thread w/ wipe
-0.4oz (-11 g)
– Remove silicone wipe & retainer
Length:
5.9 in. (150
mm) x 1.55 in. (39.4mm) Dia.*- Vox S™ Direct Thread
4.4 in. (112
mm) x 1.55 in. (39.4mm) Dia.*- Vox K™ Direct Thread
*Max dia at Serial ID ring; core dia. 1.5? (38mm)
Material:
Welded Core-
Heat Treated C300 Nickel-Cobalt Maraging Alloy US origin, DFAR certified
End cap – 17-4
H1150 Stainless US origin, DFAR certified
DT adapter-
6AlV4 Titanium (Gr. 5) US origin, DFAR certified
Black nitride
finish
DT adapter is
high temp graphite Cerakote® finish
Mounting: Compatible with SilencerCo.™ Omega™ and similar
mount threads (1.375-24)
1/2-28 RH
Optional Direct Thread (SKU EA22)
5/8-24 RH
Standard Direct Thread
Dead Air™
Key-MO™
SilencerCo.™
ASR™
Q™ Plan-B™
Area 419™
Hellfire™
Rating: 7.62mm / .30cal bore
5.56mm /
308WIN / 300BLK Full Auto
300WM / 300RUM
No barrel
length restrictions
Design: Welded baffle stack with removable end cap, 1-1/4
in. standard hex
Standard
reconfigurable wipe nose
Interchangeable industry-standard mounts, 1.375 x 24 thread for mounts
VOX™ Silencer options:
Vox S™ w/ 5/8-24
Direct Thread Adapter– (SKU: EA04)
Vox K™ w/ 5/8-24
Direct Thread Adapter– (SKU: EA06)
Accessory 1/2-28
Direct Thread Adapter– (SKU: EA22)
Accessory 5.56mm
End Cap– (SKU: EA33)
Accessory 7.62mm
Titanium End Cap– (SKU: EA32)
Wipes:
The wipe material is 1/8? reinforced silicone sheet
(McMaster-Carr PN 3635K17) that is punched with punch (McMaster-Carr PN
3427A26) out 1-1/8? dia disks. The use of an end grain wood block or soft
plastic anvil is recommended. The nose hex is 1-1/4? (wrench supplied) and the
wipe retainer uses a 9/16? socket. All threads should have an anti seize
applied when reassembling (McMaster-Carr PN 1288K12)
Wipes may be replaced by a dealer or users can repair their
silencers; they just can’t manufacture and stockpile silencer parts. Making and
replacing wipes 1:1 is acceptable. You cannot make them for other people or
have more than one at a time. The old wipe should be destroyed before a new one
is made.
Per BATF regulations Energetic Armament does not sell
replacement wipes. This guide DOES NOT constitute legal advice and firearms
laws change regularly. Please consult your dealer or an attorney for guidance
with all laws and regulations.
What’s in the Box:
Vox™ Silencer w/ 5/8-24 direct thread adapter
Wrench multi-tool (mount spanner & 1-1/4 hex for end
cap)
Vox Blox™ vise block
Packet of anti-seize
Instruction manual
Decals
.png)